Best circular saw blade for cutting aluminum
1. Concord Blades ACB0725T060HP 7-1/4″ 60 Teeth.
Concord Blades...Having 80 TCG teeth, the ACB0725T080HP can cut thin aluminum sheets, PVC pipes, plexiglass, and fiberglass efficiently.
That said, you should only use this saw blade for light-duty cutting jobs.
Besides, owing to expansion slots to excavate the heat rapidly, it will hardly heat up for the light work it is doing, too.
It is cheap, so if sometimes you have to slice thick aluminum pieces, it is okay. You can always purchase a new one if the old one is broken or distorted.
[i2pc show_title=”false” title=”Pros & Cons” show_button=”false” pros_title=”Pros” cons_title=”Cons” ][i2pros]Incredibly budget-friendly.2. DEWALT DW9152 6-1/2-Inch 36-Tooth.
Sale
DEWALT Circular Saw...[i2pc show_title=”false” title=”Pros & Cons” show_button=”false” pros_title=”Pros” cons_title=”Cons” ][i2pros]Incredibly budget-friendly.Great for cutting thin aluminum.It does not heat up easily.[/i2pros][i2cons]Create rough edges when cutting thick aluminum.[/i2cons][/i2pc]
Thanks to carbide teeth, this DEWALT DW9152 can slice through hard metals like aluminum, just as if it is slicing plywood.
Apart from superior strength, the carbide material also protects the blade from temperature changes, corrosion, and friction. In other words, the product will stay with you for a very long time.
With only 36 teeth on a 6-½-inch diameter, the blade is ideal for thick pieces of metal.
However, there are two remarkable downsides. Firstly, the kerf is quite thin, which only fits small motors. Secondly, the blade is likely to spray aluminum fragments if attached to cordless saws.
[i2pc show_title=”false” title=”Pros & Cons” show_button=”false” pros_title=”Pros” cons_title=”Cons” ][i2pros]Good value for the price.3. Oshlun SBNF-100100 10-Inch 100 Tooth.
[i2pc show_title=”false” title=”Pros & Cons” show_button=”false” pros_title=”Pros” cons_title=”Cons” ][i2pros]Good value for the price.It can cut cleanly and evenly.High performance for cutting thick workpieces.[/i2pros][i2cons]It may spray aluminum fragments if attached to cordless saws.The kerf is thin.[/i2cons][/i2pc]
Sale
Oshlun SBNF-100100...The Oshlun SBNF-100100 saw blade is made out of commercial-grade C-1 carbide for extra durability. Besides, the Chip Tooth Grind design delivers flawless finishes for cutting all kinds of non-ferrous metals such as aluminum, bronze, brass, and copper.
You don’t have to worry about the blade heating up because once the temperature of the blade rises, the copper-plugged expansion slots will allow it to expand effortlessly.
Concerning the price, we know it is a bit pricey to many users, but you are bound to appreciate its performance.
[i2pc show_title=”false” title=”Pros & Cons” show_button=”false” pros_title=”Pros” cons_title=”Cons” ][i2pros]High performance.4. TOMAX 7-1/4-Inch 60 Tooth TCG Metal Saw Blade.
TOMAX 12-Inch 100 Tooth...[i2pc show_title=”false” title=”Pros & Cons” show_button=”false” pros_title=”Pros” cons_title=”Cons” ][i2pros]High performance.Low noise and vibration.Perfect for cutting non-ferrous materials.[/i2pros][i2cons]Inappropriate for cutting plastic.Not cheap.[/i2cons][/i2pc]
If you are seeking a circular saw blade with maximum longevity and precision at a reasonable price, here it is.
The TOMAX 7-1/4-Inch 60 Tooth TCG Metal Saw Blade is ideal for cutting not only aluminum but also other non-ferrous metals and plastic.
The construction-grade carbide teeth and TCG Grind themselves can resist external impacts very well and ensure a very long lifespan. Additionally, the electrophoretic covering all over the blade helps to fight against corrosion as well as rust.
Are you still unsure about its quality? If so, the limited lifetime warranty from the manufacturer will eliminate all of your wonderings.
[i2pc show_title=”false” title=”Pros & Cons” show_button=”false” pros_title=”Pros” cons_title=”Cons” ][i2pros]Construction-grade carbide teeth.5. Evolution Power Tools RAGE BLADE
[i2pc show_title=”false” title=”Pros & Cons” show_button=”false” pros_title=”Pros” cons_title=”Cons” ][i2pros]Construction-grade carbide teeth.TCG Grind.5500 RPM.Anti-vibration.[/i2pros][i2cons]It might heat up dramatically.[/i2cons][/i2pc]
Evolution Power Tools...
As its name suggests, this multi-purpose blade can tackle a wide range of materials from non-ferrous metals to wood, steel, and plastic.
What we love most is the anti-kickback system, which ensures the safety of users better than most standard circular saw blades.
Moreover, the dry cut technology will help to minimize the heat and burrs when you use it to slice through aluminum.
Unluckily, in spite of all the good things that it has to offer above, you are likely to meet difficulty when finding a saw that fits it.
[i2pc show_title=”false” title=”Pros & Cons” show_button=”false” pros_title=”Pros” cons_title=”Cons” ][i2pros]Multi-functional.6. Diablo D1080N 10″ 80 Teeth.
[i2pc show_title=”false” title=”Pros & Cons” show_button=”false” pros_title=”Pros” cons_title=”Cons” ][i2pros]Multi-functional.Budget-friendly.The anti-kickback system increases safety.Dry cut technology.[/i2pros][i2cons]Merely medium accuracy.It can only work for short intervals.[/i2cons][/i2pc]
658 Reviews
Diablo D1080N Non-Ferrous...The Diablo D1080N saw blade is one of the leading tools in cutting non-ferrous metals and plastic, particularly the acrylic.
With shock-resistant carbide composition and perma-shield non-stick coating, it will maintain its sharpness in the long term without remarkable rusting and wearing.
The 80 TCG teeth promise to hold well even when used intensively for a long time.
Last but not least, this blade can do one thing that hardly any other blade can do – being compatible with all kinds of circular saws in the current market. Thus, you can invest in this one with peace of mind.
[i2pc show_title=”false” title=”Pros & Cons” show_button=”false” pros_title=”Pros” cons_title=”Cons” ][i2pros]Low noise and vibration.7. HICO 12-inch 100-tooth TCG Saw Blade.
[i2pc show_title=”false” title=”Pros & Cons” show_button=”false” pros_title=”Pros” cons_title=”Cons” ][i2pros]Low noise and vibration.Laser-cut heat expansion slots enhance accuracy.The blade body is perma-shield non-stick coated.Applicable to a large number of saws.[/i2pros][i2cons]Inefficient for long durations of use.Rather costly.May require a wax lubricant to cut aluminum smoothly.[/i2cons][/i2pc]
HICO 12-Inch 100-Tooth...
This product has the perfect combination between the ultra-fine 12-inch 100-tooth blade and the 1-inch laser-cut arbor.
Whether you cut aluminum, copper, brass, plastic, PVC, plexiglass, fiberglass, or acrylics with a circular saw, table saw, or miter saw, the blade will always complete its tasks perfectly.
In addition to hi-density carbide and titanium, the blade is also finished with an electrophoretic coating. Therefore, the inner blade is not only safe from aggressive use but also corrosion and rusting.
Furthermore, the laser-cut stabilizer vents can alleviate noise and vibration as well as regulate the blade temperature and prevent blade warp.
[i2pc show_title=”false” title=”Pros & Cons” show_button=”false” pros_title=”Pros” cons_title=”Cons” ][i2pros]High accuracy.8. TWIN-TOWN TTA1296 12-Inch 96 Tooth.
[i2pc show_title=”false” title=”Pros & Cons” show_button=”false” pros_title=”Pros” cons_title=”Cons” ][i2pros]High accuracy.Inexpensive.Long-lasting.[/i2pros][i2cons]Not flat.Thin kerf.[/i2cons][/i2pc]
TWIN-TOWN 12-Inch 96...
Designed for industrial use, this simple yet elegant saw blade is extremely good at cutting aluminum, non-ferrous metals, and plastics when added to a circular saw.
Most noteworthy, all of 96 teeth are made from the C4 tungsten carbide that optimizes the sustainability and even doubles the service life of the blade.
What’s more, the 12-inch cut-off blade is equipped with TCG Grind and a laser-cut 1-inch arbor for added durability and smoother cutting lines on nearly all types of materials.
Once you turn on your saw, you can feel the blade work very quiet and not become so hot. Then, every cutting application is going to be a breeze.
[i2pc show_title=”false” title=”Pros & Cons” show_button=”false” pros_title=”Pros” cons_title=”Cons” ][i2pros]Great value for money.[i2pc show_title=”false” title=”Pros & Cons” show_button=”false” pros_title=”Pros” cons_title=”Cons” ][i2pros]Great value for money.High precision.Excellent longevity.[/i2pros][i2cons]Thin kerf.Not fit many types of circular saws.[/i2cons][/i2pc]
MASTEC 10-Inch 100T...
Like other models with TCG and carbide teeth, the MASTEC MTA 10100 can smoothly slice through aluminum, non-ferrous metals, plastic, plexiglass, and the list goes on.
The customer care service of the company is very appreciable, too. If there is any issue, you can call their hotlines, and they will solve your problems within 24 hours, guarantee 100% replacement if necessary.
However, according to customers’ reviews, there is almost no complaint about this blade.
[i2pc show_title=”false” title=”Pros & Cons” show_button=”false” pros_title=”Pros” cons_title=”Cons” ][i2pros]Budget-friendly.[i2pc show_title=”false” title=”Pros & Cons” show_button=”false” pros_title=”Pros” cons_title=”Cons” ][i2pros]Budget-friendly.Wonderful customer care service.Feature TCG and carbide teeth.[/i2pros][i2cons]This blade is not well-known for durability.[/i2cons][/i2pc]
10. COMOWARE 12-inch 100-tooth Saw Blade
COMOWARE Circular Miter...
The last product on our list gets a unique design that is unmistakable.
It is engineered with a silencer groove to eliminate noise as well as vibration. Meanwhile, the super hard carbide tips come with TCG and a 15-degree hook angle so that you can cut aluminum cleanly and precisely.
For its fabulous performance, this 12-inch 100-tooth COMOWARE blade is widely used in all light-duty workshops.
Still, be aware that it is prone to become dull if you often use it to handle solid wood pieces.
[i2pc show_title=”false” title=”Pros & Cons” show_button=”false” pros_title=”Pros” cons_title=”Cons” ][i2pros]Cut through metals very quickly and cleanly.High sustainability.Ultra-hard carbide tips.There is a 15-degree hook angle.[/i2pros][i2cons]Higher price than most products on the list.[/i2cons][/i2pc]
Simple as these saw blades may look, there are quite a lot of things you need to know before rushing and buying the wrong product.
Here we will give you useful tips that are short but sufficient for you to pick out the right circular saw blade for cutting aluminum.
1. Types of blades.
When it comes to saw blades, there are plenty of models. However, you just need to focus on the following two main types of saw blades for cutting aluminum:
This kind of saw blade features segregative tiny teeth with sturdy slots between them.
That special design helps these blades to slice through metal sheets or pipes efficiently. However, they can only cut metal sheets of up to 11-gauge thickness but not thicker ones.
Carved from fiberglass, these blades get better durability and higher power.
As such, you can use them to cut through metal tubes, bars, and plates of moderate thickness.
2. Kerf
Kerf can be understood as the blade’s thickness.
As a rule of thumb, thick blades can be sharpened better and combined with robust motors to cut through things more quickly.
On the contrary, a thin kerf is weaker, more flimsy, and suitable for saws with smaller motors.
With that being said and the fact that the blade will inevitably suffer from wear and tear over time, a thicker kerf is better.
Nonetheless, because each saw merely match blades within a certain thickness range, you should only aim for the thickest kerf that your saw can fit.
3. Teeth.
Another critical factor that you cannot overlook is the tooth count of the saw blade since the number of teeth determines the nature of the cut.
While more teeth make smooth cuts, fewer teeth deliver stiffer cuts. As a result, the thicker your aluminum workpieces are, the fewer teeth your saw blade should have, and vice versa.
We can give you a straightforward formula to calculate the suitable tooth count as below:
4. Gullet.
The gullet is the little area lying between two teeth to remove chips.
The bigger chips your aluminum objects generate when being cut, the deeper gullets your saw blade should have, and vice versa.
5. Hook Angle
Hook angle or “rake”, is the angle of the blade’s teeth with respect to the blade center.
If the tips of the teeth are away from the blade motion, your blade has a negative hook angle. This negative design will reduce the feed rate dramatically.
On the other hand, if the tips of the teeth are is in the direction of the blade motion, you can perform more aggressive cuts.
We have just summarized the most important knowledge that you need to know when buying a circular saw blade for cutting aluminum.
Hopefully, with our guide and review, you can find out the best circular saw blade for cutting aluminum for yourself.
Leave your questions below this post if there is any.
Thanks for reading!
More :