Original version 12/2018, Revised 1/2019, 3/2019, 3/2021
Note: For the purpose of this Fact Sheet, the term "disposable nitrile gloves" refers to gloves that are one-time use and have a thickness of 5-mil and less. Examples are given in the tables at the end of the fact sheet.
Nitrile is a synthetic rubber material that offers chemical and abrasion resistance and is a very good general-duty material for gloves.
Thin, disposable, nitrile gloves are the most common gloves used when handling chemicals in laboratories; however, it is important to remember that thin nitrile rubber provides only limited chemical protection. These gloves are intended to be used only as a physical barrier against brief contact with chemicals, and they need to be removed and discarded immediately after they become contaminated.
Glove materials are evaluated on three criteria when exposed to chemicals:
Breakthrough time: This is how long it takes to detect a substance inside the glove when the outside is exposed to a chemical. A glove that holds ups for greater than eight hours is considered excellent.
Degradation: This refers to the physical changes in the material such as swelling, cracking, softening or shrinking, which occur when it comes in contact with a chemical. A glove can exhibit chemical breakthrough even if it doesn’t show signs of degradation.
Permeation rate: This is the rate at which a substance passes through a glove material once breakthrough takes place. This rate includes absorption on the surface, diffusion through the material, and desorption on the inside surface.
It is important to remember that laboratory testing data does not take into account the effects of hand movement and body temperature. The actual protection will be less for a glove that is being worn and stressed during use.
Optimizing Glove Protection
Glove thickness is usually given in the unit mils, which is equal to one one-thousandth of an inch; therefore, a glove that is 10 mil, is 0.010 inches thick. A thicker gauge glove will provide more protection than a thinner glove of the same material, but often at the expense of touch-sensitivity and dexterity.
Double-gloving can be used to increase the total breakthrough time of a particular glove, but this increases hand fatigue and overheating and is recommended only for short-duration tasks.
Selecting the right size
A glove that is too small for your hand will be over-stretched, which stresses the material and makes it less protective. A glove that is too large may compromise dexterity and may also become more easily damaged during use. Use the manufacturer's size chart to choose an appropriate fit.
Glove removal (or "doffing") must be done carefully to avoid contact with the outside of the glove. This video from UCLA demonstrates two methods of proper glove removal.
Soiled gloves can contaminate objects and surfaces, later exposing you to chemical hazards. When this occurs, you can unknowingly be exposed to chemical hazards. If you do experience an acute health effect, it can be difficult to determine which chemical was the source of the exposure.
Reduce the likelihood of cross contamination by:
Do not wear gloves in hallways, offices, break rooms, elevators, restrooms, or any other public areas!
Example of Nitrile Product with Low-Dermatitis PotentialIn addition to their superior chemical resistance profile, another reason that nitrile gloves are used instead of latex in Penn research labs is to avoid the skin allergies that can be caused by the proteins in the latex rubber. It is possible, however, for some individuals to be sensitive to the accelerators (chemical additives) in nitrile.
Accelerator-free nitrile glove products are available for people who have sensitivity to standard nitrile gloves. One example is pictured here: Hourglass International™ HandPRO™ FreeStyle1100 Nitrile Exam Gloves